Español 
Français 
Deutsch 
Nederlands 
Italiano 
中文 11111111
With the advanced temperature control technology, users can set the target temperature precisely by 1℃.
About NANCENT
Find out more about Nancent
Driven by R&D,
powered by expertise
Heal the planet,
one home at a time
Factory Tour
Products
Get your ultimate
cold therapy solution
Elevate your spa experience
to new heights
Elevate your pool experience
Experience the future
of home comfort
The smart, efficient way
to heat your water
Services
Complete service
from start to finish
Fast, regional support
Tailored solutions
for specific needs
Quick answers
to common questions
11111111
With the advanced temperature control technology, users can set the target temperature precisely by 1℃.
1111111
BLUECOLD 2 Ice Bath Chiller features a built-in reversing valve for switching between heating mode and cooling mode, its operational range spans ambient temperatures of -5℃ to 43℃ and water temperatures of 2℃ to 40℃.
11111111111111
BLUECOLD 2 Ice Bath Chiller uses high-efficiency and precise chilling, low water consumption operation and low-carbon refrigerant technology to reduce carbon emissions over the entire life cycle by 76% compared to traditional ice cubes under the same demand, achieving a more environmentally friendly refrigeration effect.
ALL-IN-ONE OR SPLIT?
Split Type
Equipped with an inflatable bathtub, the lce Bath Chiller is installed separately.
The water pump, water filter, ozone sterilizer and UV sterilizer are built inside the lce Bath Chiller's cabinet.
Advantages
● Wheeled portable design for effortless mobility.
● The inflatable tub capacity selection is more flexible.
● Equipped with inflatable bathtub as a standard, it can be convenient for storage and significantly cost-saving compared with the ALL-IN-ONE TYPE.
Flexible Applications
DESIGN HIGHLIGHTS
Split Type
TRIPLE NOISE REDUCTION
● BLUECOLD 2 Ice Bath Chiller features full-cabinet thick sound insulation for significant noise reduction.
● Rubber wheels or rubber feet effectively reduce vibration and noise.
● Sturdy base design further reduces the compressor vibration and noise.
Parameters
| Model: NF- | 25CR3 |
| Type | Cooling & Heating |
Water Volume & Cooling Time From 25℃ to 5℃ (Ambient Temp.: 30℃) | 50L: ≤1.3h 100L: ≤2.5h 200L: ≤5h 300L: ≤7.5h 500L: ≤12.5h |
Cooling Water Temperature Range (℃) | 2~30 |
| Heating Water Temperature Range (℃) | 9~40 |
| Cooling Operating Ambient Temperature Range (℃) | 10~43 |
| Heating Operating Ambient Temperature Range (℃) | -5~43 |
| [Cooling] Ambient Temperature (DB/WB): 35℃/-; Water Outlet: 27℃; Water Flow: 1.2m3/h | |
| Cooling Capacity (kW) | 1.60 |
| Power Input (kW) | 0.81 |
| EER | 1.98 |
| [Cooling] Ambient Temperature (DB/WB): 27℃/-; Water Outlet: 5℃; Water Flow: 1.2m3/h | |
| Cooling Capacity (kW) | 1.12 |
| Power Input (kW) | 0.60 |
| EER | 1.87 |
| [Cooling] Ambient Temperature (DB/WB): 15℃/-; Water Outlet: 5℃; Water Flow: 1.2m3/h | |
| Cooling Capacity (kW) | 1.56 |
| Power Input (kW) | 0.56 |
| EER | 2.79 |
| [Heating] Ambient Temperature (DB/WB): 27oC/24.3oC; Water lnlet: 26℃; Water Flow: 1.2m3/h | |
| Heating Capacity (kW) | 3.48 |
| Power Input (kW) | 0.61 |
| EER | 5.70 |
| [Heating] Ambient Temperature (DB/WB): 15oC/12oC; Water lnlet: 26℃; Water Flow: 1.2 m3/h | |
| Heating Capacity (kW) | 2.41 |
| Power Input (kW) | 0.64 |
| EER | 3.77 |
| [Heating] Ambient Temperature (DB/WB): 27oC/24.3oC; Water lnlet: 38℃; Water Flow: 1.2 m3/h | |
| Heating Capacity (kW) | 3.17 |
| Power Input (kW) | 1.13 |
| EER | 2.81 |
| General Information | |
| Power Supply | 220-240V~/50Hz |
| Rated Power Input (kW) | 1.30 |
| Rated Current (A) | 5.65 |
| Refrigerant | R32 |
| Comppressor Brand | HIGHLY |
Throttling Device | EEV |
| Water Side Heat Exchanger | Titanium Heat Exchanger |
| Circulation Pump | Low-Voltage Centrifugal Anti-Corrosion Pump |
| Sterilization Device | Built-in Ozone Sterilizer / Built-in UV Sterilizer (Optional) |
| Water Filter | Cartridge Filter |
| Display | LED Screen |
| Wi-Fi Function | Yes (Optional) |
| Transport Wheels | Yes |
| Carry Handles | Yes |
| Easy Maintenance Plate | Yes |
| Quick Connectors | Yes |
Water Pipe Connection (mm | 20 |
| Inflatable Bathtub (L) | 300 (Optional) |
| Water Proof Class | IPX4 |
| Electricity Shock Proof | Class Ⅰ |
| Sound Pressure Level at 1m [dB(A)] | 51 |
| Sound Pressure Level at 10m [dB(A)] | 34 |
| Net Weight (kg) | 36 |
| Net Dimensions With Wheels [L×W×H (mm)] | 484×444×523 |
Related Products
Say goodbye to ice and hassle! The ultimate solution for your ice bath routine.
This budget-friendly water chiller is specifically designed to fit seamlessly into any bathtub, providing you with a refreshing and comfortable bathing experience.
Perfect for spas, ice baths, and mini pools. Customize your water experience.
Nancent Portable Ice Bath Chiller
Perfect for spas, ice baths, and mini pools. Customize your water experience.
Heat Pump Factory Since 2008
Heat Pump Factory Since 2008
Heat Pump Factory Since 2008
Nancent Eco-energy Solution Co., Ltd.
Tel.: +86 760 2250 5095
Phone: +86 190 0200 0096
E-mail: info@nancent.com
Add.: No. 2, Shengkai Road, Huangpu Town, Zhongshan, Guangdong, P.R. China
